News
Contact Us

Address:No.500 Qianhu Road, Huishan District, Wuxi City

Tel:0086-13771176471

Email:
manager18@wxweihua.com.cn

Company News Location:Home > News > Company News > How to use C-shaped ...

How to use C-shaped steel forming machine correctly

Source: │ Datetime:2020-02-26

Weihua C-roll forming machine can make different types of C-channel  by changing blades. Equipment high-blade manual unwinding machine, main roll forming machine, hydraulic punching device, hydraulic cutting device, how to use C-shaped steel forming machine correctly?

1. Do not work above the minimum closed height, that is, the minimum distance from the bottom surface of the upper sliding box to each working surface is set to 290. It is not allowed to exceed 290㎜, and the mold must be designed in strict accordance with this requirement to prevent machine tool accidents. Pay attention to the height of the lubricant in the sliding box and the sides of the machine.
2. Always pay attention to the height of the lubricant in the sliding box and the sides of the machine.
3. The C-shaped steel forming machine should be wiped frequently and kept clean, and no mud and water are allowed.

These three points must be observed during production. During the production of C-section steel, it is necessary to ensure that these three points are free from errors in order to ensure the qualification rate of the product. Every manufacturer should check the working status of C-channel forming machine at all times.
Products
Order Now!